西湖总磷模型构建及内循环引水效果分析          下载免费PDF全文

滑磊  尤爱菊  韩曾萃  腾辉  朱军政 《水文》2015,35(4):27-32

调水是目前快速改善湖泊水质的有效方法之一,但是对于调水所能达到的最佳效果研究很少。以杭州西湖为例,利用环境流体动力学模型EFDC构建了西湖TP模型,对通过苏堤各桥孔的流量、外西湖分层流场和水质浓度进行了验证,分析了在现有外围调水情况下增加西湖内循环引水后西湖TP的时空变化。模拟结果表明,增加内循环引水,直接将低浓度区的水引至高浓度区,能够明显降低高浓度区的水质;低浓度区由于引水量的减小,区域内水质浓度会有一定的上升;全湖平均水质浓度基本不会发生改变。在没有增加外部引水的情况下,内循环引水可以使湖泊水体掺混更加均匀,对于防止高浓度区富营养化有很好的效果。增加内循环引水对西湖改善高浓度区水质有一定的指导意义,同时也可为相似湖泊增加内循环引水措施提供借鉴。  相似文献   

Ideas out of context and the contextualization of ideas: The transference of Jane Jacobs to São Paulo     

《Geoforum》2015

The mobility and contextualization of urban policies between localities have received significant attention in recent literature. A number of mechanisms have been identified, including “best practices,” “policy tourism,” multinational firms, and conferences have been identified. This article identifies a new mechanism: the translation and publication of seminal theses into additional languages. Using citations analysis and interviews in São Paulo, this mechanism is confirmed as an additional mode of transference and identified as being responsible for the growth in interest in Jane Jacobs in São Paulo. However, this article finds that despite the increase in accessibility to her ideals, her emphasis on contextuality was overlooked in that case. This, in turn, calls attention to larger issues of the use of so-called ‘universally-good’ examples of urbanism.  相似文献   

Physical analog (centrifuge) model investigation of contrasting structural styles in the Salt Range and Potwar Plateau,northern Pakistan     

《Journal of Structural Geology》2015

We use scaled physical analog (centrifuge) modeling to investigate along- and across-strike structural variations in the Salt Range and Potwar Plateau of the Himalayan foreland fold-thrust belt of Pakistan. The models, composed of interlayered plasticine and silicone putty laminae, comprise four mechanical units representing the Neoproterozoic Salt Range Formation (basal detachment), Cambrian–Eocene carapace sequence, and Rawalpindi and Siwalik Groups (Neogene molasse), on a rigid base representing the Indian craton. Pre-cut ramps simulate basement faults with various structural geometries.A pre-existing north-dipping basement normal fault under the model foreland induces a frontal ramp and a prominent fault-bend-fold culmination, simulating the Salt Range. The ramp localizes displacement on a frontal thrust that occurs out-of-sequence with respect to other foreland folds and thrusts. With a frontal basement fault terminating to the east against a right-stepping, east-dipping lateral ramp, deformation propagates further south in the east; strata to the east of the lateral ramp are telescoped in ENE-trending detachment folds, fault-propagation folds and pop-up structures above a thick basal detachment (Salt Range Formation), in contrast to translated but less-deformed strata with E–W-trending Salt-Range structures to the west. The models are consistent with Salt Range–Potwar Plateau structural style contrasts being due to basement fault geometry and variation in detachment thickness.  相似文献   

Displacement transfer from fault-bend to fault-propagation fold geometry: An example from the Himalayan thrust front     

《Journal of Structural Geology》2015

The leading edge of the ENE-trending Himalayan thrust front in Pakistan exhibits along-strike changes in deformational style, ranging from fault-bend to fault-propagation folds. Although the structural geometry is very gently deformed throughout the Salt Range, it becomes progressively more complex to the east as the leading edge of the emergent Salt Range Thrust becomes blind. Surface geology, seismic reflection, petroleum well, and chronostratigraphic data are synthesized to produce a 3-D kinematic model that reconciles the contrasting structural geometries along this part of the Himalayan thrust front. We propose a model whereby displacement was transferred, across a newly-identified lateral ramp, from a fault-bend fold in the west to fault-propagation folds in the east and comparable shortening was synchronously accommodated by two fundamentally different mechanisms: translation vs. telescoping. However, substantially different shortening distribution patterns within these structurally contrasting segments require a tear fault, which later is reactivated as a thrust fault. The present geometry of this S-shaped displacement transfer zone is a combined result of the NW–SE compression of the lateral culmination wall and associated tear fault, and their subsequent modification due to mobilization of underlying ductile salt.  相似文献   

National policy and SMEs in technology transfer: the case of Israel     

Aliza Belman Inbal  Asaf Tzachor 《Climate Policy》2015,15(1):88-102

Increasing the rate of climate technology transfer is a critical concern. The international community facilitates the development and deployment of climate technologies for the needs of the South in two primary ways: first, through the use of multilateral frameworks for technology transfer and, second, through in-country capacity building for research, development, and deployment in developing countries. However, scant attention is given to whether national-level frameworks in industrialized countries can support technology transfer. This issue may be of particular relevance to small and medium enterprises (SMEs) in developed countries, due to their relative lack of experience in international markets. The barriers that prevent SMEs from developing and exporting more technologies to the South are identified, by using Israel as a case study. Although Israel is an important global source of climate technology innovation, it currently does not engage much with the developing world. Four principle barriers to greater involvement of OECD SMEs in technology transfer for climate mitigation in developing countries are: (1) lack of knowledge of market needs in developing economies, (2) lack of financial mechanisms to support R&D, (3) lack of opportunities for partnership building, and (4) lack of support for demonstration sites in developing countries.  相似文献   

Innovation for sustainable energy from a pro-poor perspective     

Letha Tawney  Mackay Miller  Morgan Bazilian 《Climate Policy》2015,15(1):146-162

The development and transfer of clean energy technologies to achieve universal energy access is challenging due to the inherent complexities of the energy sector, and the energy governance and financial systems in developing economies. Innovation is an essential part of successfully addressing these difficulties. Duplicating the energy infrastructure models of developed countries will not be sufficient to meet the needs of poor consumers. To the extent that innovation can accelerate energy access, it is important to understand the specific types of innovations that are necessary and how they might be facilitated. The general features of existing international clean energy innovation systems, which are predominantly driven by the markets and emissions reduction mechanisms of developed and rapidly growing emerging economies, are reviewed and the alignment of these systems to the innovation processes required to extend energy access globally is evaluated. Drawing on the innovation policy literature, the attributes of effective international and domestic energy innovation systems that are pro-poor and the associated policy approaches are identified.  相似文献   

Intellectual property rights and the transfer of climate change technologies: issues,challenges, and way forward     

Ahmed Abdel-Latif 《Climate Policy》2015,15(1):103-126

The role of intellectual property rights (IPRs) in the development and transfer of climate change technologies has been a contentious issue in negotiations under the United Nations Framework Convention on Climate Change (UNFCCC). Irreconcilable differences seem to oppose those who believe IPRs are an inherent barrier to the transfer of climate change technologies and those who argue they are an essential incentive to innovation. After providing an overview of the polarized debate on this issue, this article reviews the existing literature and empirical evidence and looks into some practical initiatives and recent developments. Finally, it seeks to identify a way forward that could help overcome the current stalemate in international deliberations by suggesting a number of parameters to structure the discussion on this complex issue.  相似文献   

基于Landsat TM影像不同地表温度反演算法的比较     

刘冰  包国涛  彭凯  石孟  何环蕾 《地理信息世界》2015,(3)

地表温度是反映地表环境的一个重要参数,精确获取地表温度的方法对研究城市热岛效应、进行生态环境监测评价是必不可少的。利用遥感手段进行地表温度的反演是一种较新颖的方法,相对成熟的反演算法主要有单通道算法、辐射传输方程法及单窗算法。本文以山东省威海市Landsat TM数据为例,分别利用辐射传输方程法和单窗算法进行地表温度反演,通过遥感目视解译的方法提取研究区各类典型地物对应的地表温度,进行统计分析,结果表明,两者反演得到的地表温度具有一致的变化趋势,其中单窗算法中不同典型地物的地表温度整体标准差较小,如建设用地为0.530,起伏波动小,算法精度略优于辐射传输方程法。  相似文献   

Prediction of the dynamic response of a slender marine structure under an irregular ocean wave using the NARX-based quadratic Volterra series     

《Applied Ocean Research》2015

The time series of the dynamic response of a slender marine structure was predicted in approximate sense using a truncated quadratic Volterra series. The wave-structure interaction system was identified using the NARX (Nonlinear Autoregressive with Exogenous Input) technique, and the network parameters were determined through supervised training using prepared datasets. The dataset used for network training was obtained by nonlinear finite element analysis of the slender marine structure under random ocean waves of white noise. The nonlinearities involved in the analysis were both large deformation of the structure under consideration and the quadratic term of the relative velocity between the water particle and structure in the Morison formula. The linear and quadratic frequency response functions of the given system were extracted using the multi-tone harmonic probing method and the time series of the response of the structure was predicted using the quadratic Volterra series. To check the applicability of the method, the response of a slender marine structure under a realistic ocean wave environment with a given significant wave height and modal period was predicted and compared with the nonlinear time domain simulation results. The predicted time series of the response of structure with quadratic Volterra series successfully captured the slowly varying response with reasonably good accuracy. This method can be used to predict the response of the slender offshore structure exposed to a Morison type load without relying on the computationally expensive time domain analysis, especially for screening purposes.  相似文献   

基于有理多项式系数模型的物方面元最小二乘匹配   总被引：2，自引：1，他引：1  

张过  陈钽  潘红播  江万寿 《测绘学报》2011,40(5):592-597

针对物方面元最小二乘匹配仅适用于单中心投影框幅式成像的匹配制作区域DSM问题,提出基于有理多项式系数（RPC）模型的物方面元最小二乘匹配算法,结合匹配窗口区域内多中心平行投影方式,构建RPC模型下的投影方程,将物方面元最小二乘匹配算法从适用于单中心投影框幅式成像扩展到适用于多中心投影推扫式成像的立体匹配,并用SPOT5-HRG、GeoEye、IKONOS立体影像进行试验验证。试验表明,RPC模型能用于物方面元最小二乘匹配且不损失匹配精度,增加了物方面元最小二乘匹配的应用范围和价值。  相似文献